Sigma Aerospace College is Proud to be a Skills Assure Supplier.
Queensland Government subsidised training

Queensland funded aeroskills fees and pathways

Sigma Aerospace College Pty Ltd — RTO 40713

This page publishes Sigma’s student co-contribution fees and key pre-enrolment information for approved Queensland employment-based training under the Career Start Program 2025–28, Career Boost Program 2025–28 and Program Schedule 2 — School-Based Apprenticeships and Traineeships (SATs) for Sigma’s approved Certificate II offering.

Current as at September 2026. Fees, qualification approvals, eligibility rules, nominal terms and government initiatives may change. Sigma confirms the current requirements in writing before enrolment.

Consultation and eligibility assessment are required before applying

Funded workplace enrolments are password protected. Do not submit an application until Sigma has completed a pre-enrolment consultation, checked your program entitlement and eligibility, reviewed the registered training contract and employer arrangements, and issued the application password.

Funding acknowledgement: Eligible training is subsidised by the Queensland Government. The subsidy is paid directly to Sigma Aerospace College. A student co-contribution fee normally applies to eligible full-time and part-time apprentices and trainees unless an approved partial or full fee exemption applies. An approved school-based apprentice or trainee pays no student co-contribution fee.

Which program and pathway applies?

Career Start and Career Boost are the non-school pathways published on this page. Eligible Queensland school students in Years 10, 11 or 12 may instead use a registered School-Based Apprenticeship or Traineeship, but government-funded SAT arrangements are limited to approved Certificate II or III qualifications.

AQF 3 and below Non-school traineeship

Career Start Program 2025–28

For eligible people who are no longer at school and are employed under a registered Queensland traineeship. Sigma’s approved offering on this page is MEA20518 Certificate II in Aircraft Line Maintenance.

Read the Queensland Government Career Start information.

AQF 4 and above Non-school pathway

Career Boost Program 2025–28

For eligible people who are no longer at school. Sigma’s Certificate IV offerings use the apprenticeship pathway. Sigma’s Diploma offerings use the traineeship pathway.

Read the Queensland Government Career Boost information.

Years 10–12 Certificate II only

VET in Schools — School-Based Apprenticeship or Traineeship

For eligible Queensland school students employed under a registered school-based training contract. DTET has confirmed funded SAT delivery is limited to Certificate II or III. Sigma’s current approved SAT offering is MEA20518 Certificate II in Aircraft Line Maintenance. Sigma’s Certificate IV and Diploma qualifications are not available under government-funded SAT arrangements.

Student co-contribution: $0 for an approved SAT enrolment. Read the Queensland Government VET in Schools information.

Career Start — total student co-contribution fees

Program pathway: Queensland traineeship. Delivery mode: blended workplace delivery. Nominal duration: 24 months.

Qualification stream/specialisation versus elective focus: an official stream or specialisation forms part of the national training product where shown. Elective focus is Sigma’s planned unit and workplace focus for the particular offering; it is not an additional qualification title.
Qualification and Stream/Specialisation Elective Focus Training Pathway Standard Total Co-contribution Partial Fee Exemption Total Co-Contribution Full Fee Exemptions / Initiatives Nominal Duration
MEA20518 Certificate II in Aircraft Line Maintenance
No formal stream/specialisation
Fixed-wing aircraft — gas turbine Traineeship $992 $396.80 Other full exemptions apply only where eligibility is confirmed. 24 months
MEA20518 Certificate II in Aircraft Line Maintenance
No formal stream/specialisation
Fixed-wing aircraft — piston Traineeship $992 $396.80 Other full exemptions apply only where eligibility is confirmed. 24 months
MEA20518 Certificate II in Aircraft Line Maintenance
No formal stream/specialisation
Rotary-wing aircraft — gas turbine Traineeship $992 $396.80 Other full exemptions apply only where eligibility is confirmed. 24 months
MEA20518 Certificate II in Aircraft Line Maintenance
No formal stream/specialisation
Rotary-wing aircraft — piston Traineeship $992 $396.80 Other full exemptions apply only where eligibility is confirmed. 24 months

School-Based Apprenticeship or Traineeship — student co-contribution

Program: VET in Schools — School-Based Apprenticeships and Traineeships. Sigma’s current approved SAT qualification is MEA20518 Certificate II in Aircraft Line Maintenance. Government-funded SAT delivery is limited to approved Certificate II or III qualifications; no Sigma Certificate IV or Diploma offering is available under a funded SAT arrangement.

Qualification Elective Focus Training Pathway Student Co-contribution Nominal Duration
MEA20518 Certificate II in Aircraft Line Maintenance Fixed-wing aircraft — gas turbine School-based traineeship $0 24 months
MEA20518 Certificate II in Aircraft Line Maintenance Fixed-wing aircraft — piston School-based traineeship $0 24 months
MEA20518 Certificate II in Aircraft Line Maintenance Rotary-wing aircraft — gas turbine School-based traineeship $0 24 months
MEA20518 Certificate II in Aircraft Line Maintenance Rotary-wing aircraft — piston School-based traineeship $0 24 months

Important: SAT eligibility and the $0 student co-contribution are confirmed before enrolment. The learner must have an eligible registered school-based training contract, meet the current Program Schedule 2, QSTL and QTIS requirements, and complete Sigma’s pre-enrolment checks.

Career Boost — total student co-contribution fees

Program pathways: Certificate IV — apprenticeship; Diploma — traineeship. Delivery mode: blended workplace delivery. Nominal duration: 48 months.

Qualification stream/specialisation versus elective focus: the Aircraft Maintenance Stream and Component Maintenance Workshop Stream shown for MEA40618 and MEA40718 are official training-package streams. Fixed wing, rotary wing, engine type, composites and sheet metal describe Sigma’s planned elective and workplace focus.
Qualification and Stream/Specialisation Elective Focus Training Pathway Standard Total Co-contribution Partial Fee Exemption Total Co-Contribution Full Fee Exemptions / Initiatives Nominal Duration
MEA40618 Certificate IV in Aeroskills (Avionics)
Component Maintenance Workshop Stream
Avionic component maintenance Apprenticeship $1,072 $428.80 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA40618 Certificate IV in Aeroskills (Avionics)
Aircraft Maintenance Stream
Fixed-wing aircraft Apprenticeship $2,368 $947.20 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA40618 Certificate IV in Aeroskills (Avionics)
Aircraft Maintenance Stream
Rotary-wing aircraft Apprenticeship $2,496 $998.40 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA40718 Certificate IV in Aeroskills (Mechanical)
Aircraft Maintenance Stream
Fixed-wing aircraft — gas turbine Apprenticeship $2,160 $864.00 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA40718 Certificate IV in Aeroskills (Mechanical)
Aircraft Maintenance Stream
Fixed-wing aircraft — piston Apprenticeship $2,480 $992.00 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA40718 Certificate IV in Aeroskills (Mechanical)
Aircraft Maintenance Stream
Rotary-wing aircraft — gas turbine Apprenticeship $2,256 $902.40 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA40718 Certificate IV in Aeroskills (Mechanical)
Aircraft Maintenance Stream
Rotary-wing aircraft — piston Apprenticeship $2,512 $1,004.80 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA40718 Certificate IV in Aeroskills (Mechanical)
Component Maintenance Workshop Stream
Gas turbine engine component maintenance Apprenticeship $1,136 $454.40 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA40718 Certificate IV in Aeroskills (Mechanical)
Component Maintenance Workshop Stream
Piston engine component maintenance Apprenticeship $880 $352.00 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA41322 Certificate IV in Aeroskills (Structures)
No formal stream/specialisation
Composite structures Apprenticeship $2,048 $819.20 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA41322 Certificate IV in Aeroskills (Structures)
No formal stream/specialisation
Sheet-metal structures Apprenticeship $1,936 $774.40 Free Apprenticeships for Under 25s: $0 where the student and qualification meet the current initiative. Other full exemptions apply only where eligibility is confirmed. 48 months
MEA50118 Diploma of Aeroskills (Avionics)
No formal stream/specialisation
Fixed-wing aircraft Traineeship $3,368 $1,347.20 Other full exemptions apply only where eligibility is confirmed. 48 months
MEA50118 Diploma of Aeroskills (Avionics)
No formal stream/specialisation
Rotary-wing aircraft Traineeship $3,304 $1,321.60 Other full exemptions apply only where eligibility is confirmed. 48 months
MEA50219 Diploma of Aeroskills (Mechanical)
No formal stream/specialisation
Fixed-wing aircraft — gas turbine Traineeship $4,544 $1,817.60 Other full exemptions apply only where eligibility is confirmed. 48 months
MEA50219 Diploma of Aeroskills (Mechanical)
No formal stream/specialisation
Fixed-wing aircraft — piston Traineeship $4,736 $1,894.40 Other full exemptions apply only where eligibility is confirmed. 48 months
MEA50219 Diploma of Aeroskills (Mechanical)
No formal stream/specialisation
Rotary-wing aircraft — gas turbine Traineeship $3,968 $1,587.20 Other full exemptions apply only where eligibility is confirmed. 48 months
MEA50219 Diploma of Aeroskills (Mechanical)
No formal stream/specialisation
Rotary-wing aircraft — piston Traineeship $4,032 $1,612.80 Other full exemptions apply only where eligibility is confirmed. 48 months

Important: A $0 fee is not automatic. Sigma must verify the student, qualification, training contract and the applicable current Queensland Government initiative before confirming a full exemption.

How fees are calculated, charged and refunded

Co-contribution calculation

  • The standard apprenticeship or traineeship co-contribution is set by DTET at $1.60 per nominal hour for each Unit of Competency or Module and is calculated when the unit or module commences.
  • The 40% partial fee exemption is exactly 40% of the standard co-contribution and applies only where the pathway-specific criteria and evidence are satisfied.
  • The totals shown are based on Sigma’s current planned unit selection for each offering. Approved credit transfer, RPL, transition or a different agreed elective selection may change the payable units and final total.
  • Fees are charged and collected at unit level. Unit-level fee amounts are reported to DTET in whole dollars; this reporting rule does not, by itself, require Sigma to round the amount charged to the student.

Payment arrangements

  • No more than 30% of the total co-contribution will be requested upfront.
  • Remaining amounts are charged progressively as payable units commence.
  • The fee may be paid by the learner, employer, family member, friend or another organisation unrelated to Sigma.
  • Sigma Aerospace College or a related entity cannot pay or waive the student fee unless DTET gives written approval or the current policy expressly permits an exemption or hardship waiver.
  • Any separate employer contribution must be negotiated, agreed and documented before enrolment and training commencement.

What the published student fee includes

The total co-contribution represents the mandatory student cost for standard training, assessment, learning materials and awarding the qualification. Students are not charged for preparing the Training Plan or Training Record, and no additional mandatory learning-material charge will be added after enrolment. Sigma provides written fee information before enrolment, including the applicable unit-level charges and payment timing.

40% Partial Fee Exemption

The following are separate bases for charging 40% of the standard apprenticeship or traineeship co-contribution, subject to current DTET policy and acceptable evidence:

Under-17 partial fee exemption

The learner was or will be under 17 years of age at the end of February in the year training is provided, is not at school and has not completed Year 12.

Concessional or eligible status

  • the learner holds an eligible Health Care, Veteran or Pensioner Concession Card;
  • the learner is the partner or dependant of an eligible cardholder and is named on the card;
  • the learner holds an official Commonwealth document confirming equivalent concession entitlement; or
  • the learner identifies as Aboriginal or Torres Strait Islander.

This page covers apprenticeship and traineeship pathways. Sigma applies the fee-exemption categories specified for those pathways and retains the evidence required by DTET.

When may a full fee exemption apply?
  • School-Based Apprenticeship or Traineeship: the student co-contribution is fully exempt for an approved Certificate II or III SAT. At Sigma, this currently applies only to MEA20518 Certificate II in Aircraft Line Maintenance.
  • Free Apprenticeships for Under 25s: no student fee is charged where both the individual and qualification meet the current initiative.
  • Other policy-based exemptions: an eligible Skilling Queenslanders for Work — Work Skills Traineeship, another specific Queensland Government fee-free initiative, or applicable foundation-skills training.
  • Extreme financial hardship: Sigma may approve a fee waiver under its documented process where the current policy permits it.

Where a school-based apprentice or trainee converts to a full-time or part-time training contract, the co-contribution applies to units not yet commenced unless another full exemption is confirmed.

Credit transfer, RPL and changes to the fee
  • No co-contribution fee is charged for approved credit transfer or DTET-defined transitional gap training.
  • Recognition of Prior Learning is assessed and costed at unit level under the applicable program rules.
  • The written fee information issued before enrolment identifies the payable units, total fee and timing of charges. Sigma updates it where an approved change alters the payable units.
Refunds and withdrawal
  • A full refund of the applicable co-contribution applies where training for the relevant unit has not commenced at cancellation.
  • A proportionate refund applies where a learner withdraws from a Unit of Competency after commencement, in accordance with Sigma’s Fees and Refunds Procedure.
  • Applicable amounts paid by an employer or industry beyond the student co-contribution and government subsidy are refunded in accordance with the agreed terms and procedure.
  • Withdrawal, cancellation, transfer or suspension may affect the training contract, government funding and future entitlement.

Read the Fees and Refunds Procedure or submit a Student Refund Request Form.

Eligibility and entitlement limits

Funding eligibility is not determined from website information alone. Sigma assesses each applicant against the current program policy, Queensland Subsidised Training List, registered training contract and evidence requirements before enrolment.

Career Start

Program Eligibility

Under Career Start, an eligible individual may access up to two subsidised training places through one of the following options:

  • a qualification typically at the certificate III level under a general training pathway and an apprenticeship/traineeship – noting that if the apprenticeship/traineeship is done first, the individual is no longer eligible to access a general training pathway qualification under Career Start; OR
  • two apprenticeships/traineeships at either certificate II or III, including School-Based Apprenticeships or Traineeships (SATs).

In addition, under Career Start, eligible individuals may access one subsidised introductory-level (‘induction’) skill set, subject to any listed student eligibility restrictions, regardless of whether they have already used their qualification entitlement or the training pathways they have undertaken.

Apprenticeship/Traineeship Pathway Eligibility

To be eligible to receive government subsidised training, the apprentice or trainee must:

  • not be a school student;
  • be currently employed as a Queensland apprentice or trainee (under a registered training contract) in an eligible apprenticeship or traineeship qualification funded through this program (this eligibility requirement does not apply to individuals seeking to enrol in a skill set);
  • not be enrolled in another DTET-funded qualification, even if it is on hold or deferred (foundation skills qualifications and self-funded/fee-for-service qualifications do not impact eligibility); and
  • not have already completed two government-funded apprenticeship/traineeship qualifications, including SATs, within the last 10 years immediately preceding the individual’s enrolment.

Note: A school student cannot use the non-school Career Start apprenticeship or traineeship pathway. An eligible school student must enter a registered SAT for an approved Certificate II or III qualification.

Program Exceptions

  • An eligible individual can complete up to two government-funded apprenticeships/traineeships within a 10-year period. This cap applies across VET in Schools SATs, Career Start and Career Boost and includes qualifications funded under previous program iterations, such as User Choice. An SAT uses one of the two entitlements.
  • Career Start is the only current program that allows an eligible individual to undertake two apprenticeships/traineeships.
  • An individual cannot do two general pathway qualifications under Career Start.

QTIS Minimum Entry Requirements

In addition to the eligibility requirements above, please review the QTIS minimum entry requirements below to confirm you meet the requirements for your chosen training product.

Career Boost

Program Eligibility

Under Career Boost, an eligible individual may access either:

  • one subsidised training place in either a certificate IV, diploma, or advanced diploma qualification under a general training pathway; OR
  • a higher-level apprenticeship/traineeship at certificate IV or above.

In addition, under Career Boost, eligible individuals may access two subsidised skill sets in priority industries or sectors.

Apprenticeship/Traineeship Pathway Eligibility

To be eligible to receive government subsidised training, the apprentice or trainee must:

  • not be a school student;
  • be currently employed as a Queensland apprentice or trainee (under a registered training contract) in an eligible apprenticeship or traineeship qualification funded through this program (this eligibility requirement does not apply to individuals seeking to enrol in a skill set);
  • not be enrolled in another DTET-funded qualification, even if it is on hold or deferred (foundation skills qualifications and self-funded/fee-for-service qualifications do not impact eligibility); and
  • not have already completed two government-funded apprenticeship/traineeship qualifications, including SATs, within the last 10 years immediately preceding the individual’s enrolment.

Note: Career Boost is not available to school students. Government-funded SAT arrangements are limited to approved Certificate II or III qualifications and do not apply to Sigma’s Certificate IV or Diploma offerings.

Program Exceptions

  • If the individual has already accessed two government-funded apprenticeships/traineeships through SAT, Career Start, Career Boost or an earlier DTET-funded program within the last 10 years, they are not eligible to undertake an apprenticeship/traineeship under Career Boost.
  • The two-qualification cap applies across VET in Schools SATs, Career Start and Career Boost. An SAT uses one of the two entitlements.
  • An individual cannot complete two qualifications under Career Boost.

QTIS Minimum Entry Requirements

In addition to the eligibility requirements above, please review the QTIS minimum entry requirements below to confirm you meet the requirements for your chosen training product.

School-Based Apprenticeship or Traineeship

Approved Sigma SAT offering

DTET has confirmed Sigma is approved under Program Schedule 2 to deliver SATs for approved qualifications at Certificate II or III level. Sigma’s current SAT offering is MEA20518 Certificate II in Aircraft Line Maintenance. No Sigma Certificate IV or Diploma qualification is available under a government-funded SAT arrangement.

Pathway Eligibility

To be eligible for the funded SAT pathway, the learner must:

  • be enrolled in Year 10, 11 or 12 at a Queensland school;
  • have entered into an eligible school-based training contract for MEA20518 and be registered on DTET’s training database;
  • not be concurrently enrolled in another qualification funded by DTET;
  • not have already completed or be enrolled in another SAT; and
  • meet the current QSTL, QTIS, work-rights, employer, workplace and school-arrangement requirements.

Student co-contribution: $0 for an approved SAT enrolment.

Entitlement Limit

A learner can undertake no more than two government-funded apprenticeship or traineeship qualifications across VET in Schools SATs, Career Start and Career Boost within a 10-year period. A SAT uses one of those two entitlements.

If a SAT training contract later converts to a full-time or part-time apprenticeship or traineeship, the student co-contribution applies to units not yet commenced unless another full exemption is confirmed.

QTIS Minimum Entry Requirements

In addition to the requirements above, review the QTIS minimum entry requirements below. Sigma confirms the learner’s school year, education standard, registered training contract, paid employment, work rights and workplace arrangements before enrolment.

QTIS minimum entry information
Qualification Queensland Pathway Minimum Education Standard Minimum Entry Age Additional QTIS Information
MEA20518 Certificate II in Aircraft Line Maintenance Traineeship Completion of Year 10 in Queensland, including minimum Year 10 Mathematics and English 13 Eligible Queensland students in Years 10–12 may undertake this qualification as a registered SAT, subject to meeting the stated education standard and all other QTIS, training-contract, employment and school requirements. Non-school applicants must hold work rights that permit participation in a Queensland traineeship.
MEA40618, MEA40718 and MEA41322 Certificate IV qualifications Apprenticeship Nil stated in QTIS 13 Government-funded SAT delivery is not available for these Certificate IV qualifications. Applicants must be no longer at school and hold work rights that permit participation in a Queensland apprenticeship.
MEA50118 Diploma of Aeroskills (Avionics) Traineeship Nil stated in QTIS 13 Government-funded SAT delivery is not available for Diploma qualifications. Diploma-level trainees generally need to be working in a supervisory role or have significant relevant occupational experience. Applicants must be no longer at school and hold work rights that permit participation in a Queensland traineeship.
MEA50219 Diploma of Aeroskills (Mechanical) Traineeship Nil stated in QTIS 13 Government-funded SAT delivery is not available for Diploma qualifications. Diploma-level trainees generally need to be working in a supervisory role or have significant relevant occupational experience. Applicants must be no longer at school and hold work rights that permit participation in a Queensland traineeship.

The QTIS minimum age is a legal entry baseline, not a guarantee of suitability, training-contract registration, funding, employment, workplace access or safe participation. Australian and New Zealand citizens generally have unrestricted work rights; a visa holder must have work rights that permit the apprenticeship or traineeship. Sigma verifies this before enrolment.

Pre-enrolment checks

Before enrolment, Sigma completes and retains the required evidence. The learner, employer and parent or guardian where applicable receive the relevant course, fee, refund, privacy, support and delivery information before enrolment or payment.

Checks completed by Sigma

  • Pre-Enrolment Assessment interview covering program and qualification suitability, employment outcomes, learning support, reasonable adjustment, fee status and QSTL restrictions.
  • AISS searches in the learner’s current and previous names within the required period before enrolment, plus direct confirmation of training history because AISS may not contain every record.
  • Verification of identity, age, citizenship or eligible visa and work rights, residential details, registered training contract and SRTO notification.
  • Employer Resource Assessment confirming facilities, equipment, range of work, qualified supervision and on-the-job training.
  • Development of the Training Plan with the learner and employer, including prerequisite and co-requisite sequencing.
  • Confirmation of the applicable pathway, school-based status where relevant, nominal term, delivery mode and approved location.

Information the applicant must disclose

  • All current and previous names.
  • All completed or partially completed Australian qualifications and units.
  • Every current enrolment, including one that is deferred or on hold.
  • Current employment, training contract, employer, supervisor, work rights and workplace access.
  • Current school enrolment and SAT arrangements, or confirmation that the applicant is no longer at school, as applicable.
  • Evidence supporting any partial or full fee-exemption claim.
  • Any language, literacy, numeracy, digital, disability, support or reasonable-adjustment need.
  • Ability to meet relevant workplace security, safety and site-access requirements.

Where the first training activity occurs more than 30 calendar days after enrolment, Sigma must reassess entitlement and eligibility before funded training commences.

Delivery, training, assessment and support

Blended workplace delivery

  • Online learning resources, learner guides, audio resources where available and practice activities.
  • Fortnightly technical webinars and live Q&A.
  • Monthly one-to-one online progress check-ins.
  • Workplace skills development under qualified supervision.
  • Formal Training Record and progress review at least every three months.
  • Face-to-face workplace visits at least every 26 weeks, or more frequently where required.
  • Additional tutoring, language, literacy, numeracy and digital support, and reasonable adjustment where identified and appropriate.

Competency-based assessment

  • Mapped knowledge assessments and competency conversations.
  • Direct practical observation by a Sigma assessor, including controlled remote observation only where permitted, justified and documented.
  • Detailed workplace observation and on-the-job verification records.
  • Work products, maintenance documentation, Training Record entries and supplementary industry evidence.
  • Supervisor verification supports evidence but does not replace the Sigma assessor’s individual assessment judgement.
  • Photos alone are not accepted as observable practical evidence.
  • Each unit is assessed as competent or not yet competent against all applicable requirements.

Completion of the qualification is not guaranteed and does not automatically issue a CASA licence or guarantee an employment or licensing outcome.

How nominal duration is applied
  • MEA20518 has a QTIS nominal term of 24 months for both the non-school traineeship and approved SAT pathway.
  • The listed Certificate IV and Diploma qualifications have a QTIS nominal term of 48 months.
  • The nominal term is the training-contract timeframe. The signed Training Plan records the agreed training sequence, workplace tasks, support, assessment and review arrangements.
  • Competency-based training does not create an automatic entitlement to early completion. Any proposed early completion or change to the training-contract term is considered individually and must be supported by sufficient evidence, completed competency outcomes, employer and learner agreement, and any required DTET process or approval.
  • Training may take longer where suitable work, qualified supervision, assessment opportunities or learner participation are not continuously available. Suspension, cancellation, transfer, change of employer or loss of approved workplace access may pause or end funded delivery.
  • Credit transfer, RPL, qualification transition, leave, support needs and prerequisite sequencing may affect the Training Plan, but do not by themselves guarantee an earlier completion date.
  • No completion date, qualification, CASA licensing outcome or employment outcome is guaranteed. A change to the planned schedule does not by itself create an additional mandatory student fee.

Approved Queensland delivery locations

Approved delivery regions: Sigma is approved to prioritise blended workplace delivery for the qualifications on this page in the Queensland regions listed below. Online, workplace and face-to-face components are scheduled in consultation with the learner and employer and remain subject to the approved qualification, pathway and mode.

  • Brisbane
  • Cairns
  • Central Queensland
  • Darling Downs – Maranoa
  • Gold Coast
  • Ipswich
  • Logan – Beaudesert
  • Mackay – Isaac – Whitsunday
  • Moreton Bay – North
  • Moreton Bay – South
  • Queensland – Outback
  • Sunshine Coast
  • Toowoomba
  • Townsville
  • Wide Bay

Availability is confirmed before enrolment. Delivery at a particular workplace depends on the current DTET approval, the qualification and pathway, suitable employer resources, qualified supervision, workplace access, learner demand and trainer capacity. For a SAT, the registered training contract and school-based employment and training arrangements must also be confirmed. Sigma confirms the applicable delivery arrangements during the pre-enrolment consultation.

Information to read before enrolment

The Queensland Government may contact learners and employers for monitoring and may ask learners to complete surveys about their training goals, experience and outcomes. Read the documents and information below before deciding whether to enrol.